BBQ TABLE
bbq table today using the H3.2 treated timber 90x45
angle cut both side on top runner (L) 820mm.follow by the bottom runner same angle cut (L) 1360mm
Finish cut top and bottom runner. Assmeble legs and runner together.
Now drilling the runners and legs for srew and bolts.
using M12x 110 Nut cup head HDG
instaling the bolts to tighten runner and legs together.
adding the top timber for table with 180mm overhang of edge.
cutting out the under bracing with the birds mouth cut. It was pretty hard to do.
No comments:
Post a Comment